
matte floor
Idropol 200 Opaco
Matte hydrophobic floor and wall finish, engineered for wet zones.

Rynova × Pava · thin overlay
Ultra-thin overlay system for renovating existing floors without rip-out.
What it is
Mini-S is a thin-build micro-resin formulation designed to overlay existing tiled, vinyl, or concrete floors without removing them. Total system thickness is typically 2–3 mm.
Used widely in Dubai apartment renovations where lifting existing tiles is disruptive or prohibited by building rules. The overlay bonds to the existing surface through a specified primer and produces the same continuous joint-free finish as full-thickness microcement.
Where it's used
Floors
Kitchens
Key properties
Frequently asked
Almost always yes — 2–3 mm is well within standard door undercut. We measure clearance during the site visit.
Yes, after a substrate-specific primer that locks the new surface to the tile glaze. Loose or hollow tiles must be repaired first.
Top-layer durability is identical. Underneath, durability depends on the existing substrate; we don't specify Mini-S over substrates that are already failing.
Mini-S is optimised for floors. For walls, we specify Art Stuc Fino, Art Stuc Grosso, or Idropol depending on grade.
Typical apartment floor (60–80 sqm) takes 6–8 working days with no demolition. Compared to tile rip-out + retile, this is 50–70% faster.

Our technical teams provide substrate assessment and custom color matching across the UAE.
Get a Quote